Clear-Com FreeSpeak Antenna Splitter - Manual (Page 37)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual 2 - 5
the character. Rotate the knob to select the character to replace it
with. Press the knob in to select the new character.
3. When selecting characters for the beltpack’s item label is complete
press the setup/enter knob again to save.
4. To exit the menu, select and then deselect (by pressing the knob
again) the fifth character in the menu.
5. The changes are saved and applied automatically five seconds after
the last time the setup/enter knob is pressed or turned. The
front-panel display flashes to indicate that the changes are being
saved and applied.
6. Repeat this entire process for the second wireless beltpack, BPK02.
CREATING A GROUP
To create a group
1. From the basestation’s front panel, use the setup/enter knob to
scroll to and select GROUPS, then GP#01, then MEMBERS.
If entries in the MEMBERS menu are already in the group these
menu entries are outlined. An outline around a menu entry means
that it is a member of the group. When an item is selected an outline
appears around it. When the item is selected again, the outline
disappears.
2. Select the following members of the group: 4WIR1, PLCHA, BPK01,
BPK02, so that only these entries are outlined.
3. To exit the Group Members menu, scroll to and select BACK from
the basestation’s front-panel menu.
4. The changes are saved and applied automatically five seconds after
the last time the setup/enter knob was pressed or turned. The
front-panel display flashes to indicate that the changes are being
saved and applied.
ASSIGNING THE GROUP LABEL TO FREES-
PEAK BELTPACK KEYS
The next step is to assign the group label created in the prevous step,
GP#01, to the first key of each of the FreeSpeak wireless beltpacks.
To assign the group label to the first key of FreeSpeak beltpack #1
1. From the basestation’s front-panel menu select BELTPACKS, then
BPK01, then KEYS. A list will be displayed showing how the 3
pages of 2 keys are currently assigned on beltpack #1.
2. Select “Pg1-1” to edit the first key of the first page. A list of
destinations will be displayed this key can be assigned to. Rotate
the setup/enter knob clockwise until “GP#01” is highlighted, then
press the knob to select it. The basestation’s display should display
the key options.
• TLK - talk key