Clear-Com FreeSpeak Antenna Splitter - Manual (Page 83)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual 5 - 1 3
A screen appears with a list of available sources and destinations to
assign to this key. The list starts with the base-station 4-wire and
party line connections, followed by each of the individual beltpacks,
and finally by the ten available groups (five standard groups and five
wireless party line groups).
Figure 5-24: Select the source/destination to assign to that beltpack key
5. Scroll through the list and select the desired source or destination to
assign to that beltpack key. A box appears around the selection and
the next screen appears for assigning the key type.
6. Select either talk (TLK), listen (LIS), talk/listen (T+L), dual talk/listen
(DTL), forced listen (FL) or talk/forced listen (TFL) for that key.
Figure 5-25: Key Type Menu
The display automatically returns to the screen for selecting the next
key to program.
7. Select the next key and follow steps 4 through 6. Continue until
sources and destinations have been assigned to all desired keys on
that beltpack.
To assign keys for another beltpack continue selecting the BACK
command on each successive screen until reaching the AVAILABLE
BELTPACKS menu. Highlight and select the next beltpack, and repeat
the above procedures.
SELECT KEY 1 FOR STG-1 -- BPK01
HDSTB
HDSTB 4WIR1
4WIR1 4WIR2
4WIR2 4WIR3
4WIR3
BACK
HDSTA
HDSTA
SELECT TYPE OF KEY 2 FOR Bpk02 - BPK02
T+L DTL FL TFL TLK LIS