Clear-Com FreeSpeak Antenna Splitter - Manual (Page 157)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual 1 0 - 7
BELTPACKS TAB
This tab allows the user to register beltpacks with the basestation, edit
key assignments and change input and output levels.
Figure 10-8: Beltpacks Tab
SELECTING THE BELTPACK TO REGISTER OR EDIT
Select which of the twenty available beltpack "slots" is to be edited
using the down arrow next to the beltpack name field. This will open a
drop-down menu containing all twenty beltpacks with serial numbers.
Figure 10-9: Beltpack List
Select the beltpack to be changed, then over-type the text in the
‘Name’ box (shown with a white background in the illustration below).
A maximum of five characters can be entered.
Enter the serial number of the beltpack in the ‘Serial Num’ box next to
the ‘Name’ box by overtyping the current number (normally the default