Changing the label of the port, Type drop-down box, Cross point assignment drop-down box – Clear-Com FreeSpeak Antenna Splitter User Manual
Page 168: Changing the label of the port -18, Type drop-down box -18, Cross point assignment drop-down box -18, Figure 10-19 party line port type menu -18
Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual
1 0 - 1 8
CHANGING THE LABEL OF THE PORT
Select the port to be changed, then over-type the text in the label edit
box.
TYPE DROP-DOWN BOX
This is only active when a partyline port is selected. It allows the user
to select between Clear-Com, Drake, RTS and OFF party line
settings. This affects the gain, termination and call signaling used
when communicating with this port.
Figure 10-19: Party Line Port Type Menu
• Clear-Com - selects Clear-Com party line compatibilty with
termination enabled.
• Drake - selects Drake party line compatibility with termination
enabled.
• RTS - selects RTS compatibility with termination enabled.
• OFF - termination disabled on party line port.
CROSS POINT ASSIGNMENT DROP-DOWN BOX
This is only active for headset, partyline and 4-wire ports and IFBs. For
a front panel headset port, it specifies the port which is called when the
"Talk" button for that port is pushed.
For a partyline or 4-wire port, it causes a permanent talk path to be
created from the port to this destination.
For an IFB it creates an IFB from the port to the destination.