Recall factory defaults, Headset limiter, Mic type – Clear-Com FreeSpeak Antenna Splitter User Manual
Page 161: Mic gain level, Mic noisegate level, Headphone off level, Sidetone level, Master volume, Recall factory defaults -11, Headset limiter -11
Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual
1 0 - 1 1
Recall Factory Defaults
This button recalls the factory default beltpack settings and can be
used to reset beltpacks to the factory settings if the saved default
settings have been lost or are not suitable.
Headset Limiter
Click on the down arrow to open a list of available headset limiter
settings. The settings run from -32dB to +16dB in steps of 1dB. The
factory default is 0dB.
MIC Type
Opening the drop-down menu displays the list of available headset
microphone types. The microphone types are Dynamic (Balanced),
Dynamic (Bnbalanced) and Electret. The factory default is Dynamic
(unbalanced).
MIC Gain Level
Click on the down arrow to open a list of microphone gain level
settings. The gain settings are in the range 20dB to 70dB in steps of
5dB. The factory default is 55dB.
MIC Noisegate Level
Click on the down arrow to open a list of microphone noisegate level
settings. The noisegate settings are in the range 1dB to 14dB in steps
of 1dB or Off. The factory default is Off.
Headphone Off Level
Click on the down arrow to open a list of headphone off level settings.
The available off level settings are -6dB, -12dB, -18dB and -70dB. The
factory default is -70dB.
Sidetone Level
Click on the down arrow to open a list of sidetone level settings. The
available sidetone level settings range from 0dB to -70dB. The factory
default is -10dB.
Master Volume
Click on the down arrow to open a list of master volume level settings.
The available master volume level settings range from 0dB to -70dB.
The factory default is -10dB.