Connecting the freespeak basestation, Understanding the back-panel connectors, Connecting the freespeak basestation 4-1 – Clear-Com FreeSpeak Antenna Splitter User Manual
Page 49: Understanding the back-panel connectors -1, Figure 4-1 freespeak basestation back panel -1, Understanding the back-panel con- nectors
Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual
4 - 1
CONNECTING THE
FREESPEAK
BASESTATION
The FreeSpeak basestation connects to the following wired interfaces
through its rear-panel connectors:
• Basestation to AC power
• Basestation to party-line channels A and B
• Basestation to program audio source
• Basestation to stage announce output
• Basestation to stage announce relay
• Basestation to 4-wire matrix ports
• Basestation to a second basestation (not used)
• Basestation to a PC
• Basestation to transceiver antennas
UNDERSTANDING THE BACK-PANEL CON-
NECTORS
Figure 4-1: FreeSpeak Basestation Back Panel
POWER
PL CH-A
PL CH-B
PRGM IN
SA OUT
SA RLY
4-WIRE / ECLIPSE PORTS
1
2
3
4
BASE
LOOP
LAN
PC PROGRAM
TRANSCEIVER
1
2
90-260V, 50/60Hz
80 Watts
1
2
3
4
5
6
7
8
9
10
11
1 - Power Connector
2 - Party Line Channel A Connectors
3 - Party Line Channel B Connectors
4 - Program Input
5 - Stage Announce Output
6 - Stage Announce Relay
7 - 4-Wire Matrix Ports
8 - Base Loop Connector (not used)
9 - LAN Connector
10 - PC Connector
11 - Transceiver Connectors
The FreeSpeak basestation
connects to several wired
interfaces that can
communicate with the
wireless beltpacks.
4