Clear-Com FreeSpeak Antenna Splitter - Manual (Page 177)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual 1 1 - 1
FREESPEAK TOOLKIT
INTRODUCTION
The FreeSpeak Toolkit is a suite of PC programs running under
Windows 2000 or above, designed to allow the user to set up, backup,
and upgrade the FreeSpeak basestation and run diagnostics on the
basestation.
The distribution CD also includes a separate toolkit for upgrading the
firmware on beltpacks and antennas.
CONFIGURATION EDITOR
The Configuration Editor is used to register beltpacks, create and back
up basestation configurations, download new configurations to
basestations and back up and restore basestation configurations made
from the basestation front panel.
The Configuration Editor also upgrades the basestation firmware when
a new version is released via the Ethernet port.
BASESTATION SERIAL FIRMWARE UPGRADER
The basestation serial firmware upgrader is used to upgrade the
basestation firmware when a new version is released via the Serial
cable.
BELTPACK AND ANTENNA SERIAL FIRMWARE
UPGRADER
The beltpack and antenna serial firmware upgrade is used to upgrade
the beltpack and antenna firmware when a new version is released via
the Serial cable.
DIAGNOSTIC PROGRAM
The diagnostic program connects to the basestation via a serial link
and may be used to investigate problems with the system.
TOOLKIT INSTALLATION
To install the FreeSpeak toolkit follow the link on the
installation/upgrade CD and click on the installation executable
“CellCom FreeSpeak V2.0 Toolkit 710838.exe”. If a FreeSpeak toolkit
is already installed on the system the FreeSpeak toolkit installer will
remove it before installing the V2.0 toolkit.
11