Clear-Com FreeSpeak Antenna Splitter - Manual (Page 125)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual 7 - 9
buttons to set the Headphone Limiter level on the slider then press
button C to return to the previous menu.
HEADSET NOISE GATE
To avoid the fluctuation in the headset noise gate it now operates as
follows:
• Turns on - upon first detecting audio to the headset audio.
• Turned off - when receiving the loudspeaker off message from the
basestation. The basestation sends this message when it is no
longer routing audio to the beltpack.
THE MICROPHONE MENU
From the main programming menu select Settings and then
Microphone Options to display the Microphones menu.
• The Microphones menu will be displayed.
• Select Microphone Type using the scroll buttons to display the
Microphone Type menu.
• Use the scroll buttons to select the microphone type from those
available (Dynamic (Bal) mic, Dynamic (UnBal) mic, Electret mic)
and then press button C to set the microphone type. Use the scroll
button to select the Exit symbol and press button C to return to the
main Microphone menu
• The Microphone menu showing the microphone level option selected.