Clear-Com FreeSpeak Antenna Splitter - Manual (Page 142)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual
8 - 8
CONNECTING AN ANTENNA SPLITTER TO THE
FREESPEAK BASESTATION AND TO TRANS-
CEIVER/ANTENNAS
After the connections have been made between the splitter and the
transceiver/antennas, make sure that the data LED’s are lit at the
individual ports on the antenna splitter. Also make sure that the both
the green power LED and the yellow data LED are lit on each FS-TA
transceiver/antenna. If all are properly lit, then the connection has
been successfully made and the coverage zones will be active and will
support beltpacks. If the transceiver antennas are not lit, check the
connections.