Clear-Com FreeSpeak Antenna Splitter - Manual (Page 194)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual
1 2 - 2
Dimensions 1-RU unit, 44 x 483 x 312 mm (hwd)
(1.75 x 19.0 x 12.5 inches)
Weight Approx. 10 lb.
FreeSpeak FS-BP Beltpack
Beltpack Frequency Response 100 Hz – 7.1 kHz
Beltpack Assignment-Select Buttons 3, used to scroll and select talk/listen
pages” and also to edit beltpack menu
options
“Label” Assignments per Select Button2 (two simultaneous talk/listen paths or
channels)
Number of Full-Duplex Audio Paths 6 (3 pairs), with individual level control
Level/Talk Controls 2 top-mounted push-to-talk rotary
encoders
Headset Connector 4-pin male, Clear-Com standard
Headset Impedance 32 ohm to 2000 ohm
Microphone Type Dynamic or electret, selectable in
beltpack menu
Microphone and Headset Limiters Selectable in beltpack menu
Powering Alkaline Battery, 4 AA alkaline cells
Rechargeable, 4 NiMH cells in AA format
Battery Charging In unit, via supplied external power
supply connected to beltpack
Battery Life Approximately 8 hours with 4 fresh AA
alkaline batteries or 4 AA high-amperage
NiMH cells
Range from Single FS-TA
Transceiver/Antenna
125 m from transceiver/antenna in
line-of-sight conditions; 50 m indoors;
use multiple FS-TAs for larger, custom
coverage areas
Dimensions Tapered design, at largest points approx.
38 x 87 x 144 mm (dwh)
(1.5 x 3.5 x 5.75 inches)