Clear-Com FreeSpeak Antenna Splitter - Manual (Page 130)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual
7 - 1 4
SET FACTORY DEFAULTS
To reset the beltpack to the factory defaults go to the main
programming menu and select Set Factory Defaults.
The factory defaults options are NO to cancel the operation or YES to
default all the user settable parameters such as limiters and levels to
the factory settings.
Select NO to cancel or use the scroll buttons to select YES to reset.
.
When the beltpack is reset to factory defaults and confirmation
message is displayed.
Press any key to return to the main menu.
TAP LATCH
The Tap Latch function determines whether the rotary push buttons
latch with one tap or two taps when the beltpack is set in latching
mode.
• Select the Button Options menu from the Programming menu.
• Select the Tap Latch on the Button options menu and use the scroll
keys to toggle between the 1 Tap Latch and 2 Tap Latch states.