Read beltpack settings, Write beltpack settings, Remember my default settings – Clear-Com FreeSpeak Antenna Splitter User Manual
Page 160: Recall my default settings, Read beltpack settings -10, Write beltpack settings -10, Remember my default settings -10, Recall my default settings -10, Figure 10-14 beltpack defaults setup -10
Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual
1 0 - 1 0
can be saved and restored in the editor and factory default settings
recalled.
Figure 10-14: Beltpack Defaults Setup
To use the beltpack defaults facility the beltpack should be connected
to the PC using the beltpack serial cable and the beltpack switched on.
Read Beltpack Settings
This button causes the configuration editor to read back the current
settings from the connected beltpack and display them in the settings
area.
Write Beltpack Settings
This button causes the configuration editor to write the current settings
from the configuration editor to the connected beltpack.
Remember My Default Settings
This button saves the current beltpack default settings for later recall.
This allows the user to ensure that all beltpacks are set up to the same
default settings if required.
Recall My Default Settings
This button recalls the last saved default beltpack settings. This allows
the user to ensure that all beltpacks are set up to the same default
settings if required.