Clear-Com FreeSpeak Antenna Splitter - Manual (Page 84)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual
5 - 1 4
SETTING THE BELTPACK AUDIO LEVEL
1. From the MAIN menu, select BELTPACKS.
The AVAILABLE BELTPACKS screen is displayed (Figure 5-5).
2. Select the beltpack for which audio levels are to be set. The
BELTPACK menu is displayed.
3. Select ‘LEVELS’. The beltpack levels editing menu is displayed, as
shown in Figure 5-26.
Figure 5-26: Beltpack Levels Menu
4. Use the Setup/Enter knob to select the input level to display the
beltpack input level setup.
Figure 5-27: Beltpack Input Level Setup
5. Use the Setup/Enter knob to set the beltpack input level in the range
-20dB to +6dB by rotating it anticlockwise to reduce the level and
clockwise to increase the level. Press the Setup/Enter knob to
select the input level.
6. Use the Setup/Enter knob to select the output level to display the
beltpack output level setup.
Figure 5-28: Beltpack Output Level Setup
7. Use the Setup/Enter knob to set the beltpack output level in the
range -20dB to +6dB by rotating it anticlockwise to reduce the level
and clockwise to increase the level. Press the Setup/Enter knob to
select the output level.
SETTING BELTPACK LATCHING
Beltpack latching determines whether the beltpack A and B latch when
pressed so that the user does not have to keep the button pressed to
maintain an audio route, or are non-latching so the audio route is only
open when the button is pressed.
1. From the MAIN menu, select BELTPACKS.
Editing levels for BPK01- BPK01 (in dB)
INPUT
0 OUTPUT
0
BACK
Input level for BPK01- BPK01 (dB)
0
Output level for BPK01- BPK01 (dB)
0