Clear-Com FreeSpeak Antenna Splitter - Manual (Page 55)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual 4 - 7
Use the rotary encoder to adjust the numerical level—clockwise to
increase the level and counter-clockwise to decrease the level.
Make the estimated changes in level and press the rotary encoder to
save the changes. Test the levels between the party line and
FreeSpeak beltpack, and make additional changes as needed. When
the levels are set as desired, press to select and the display will go to
the previous INPUT/OUTPUT screen. When both are adjusted, select
BACK on each screen until the main screen is displayed.
Users connected to the basestation can be forced to listen to the
activity on the party line by initiating a “call”.
For more information on programming the basestation, see the chapter
“Programming a System from the Basestation”.