Clear-Com FreeSpeak Antenna Splitter - Manual (Page 174)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual
1 0 - 2 4
pointer over the destination in the “Destinations Selected” list and
single click. The destination will be transferred from the selected list to
the available destination list.
SYSTEM TAB
Enter the IP address to be assigned to the basestation. This address
will become effective on a map download that restarts the basestation.
Figure 10-29: System Tab
The basestation must be configured to use the correct frequency range
for the country of use. To enter this click on the ‘Select Country’
button. The service password will be required to enter this facility.
Figure 10-30: Password Entry