Clear-Com FreeSpeak Antenna Splitter - Manual (Page 60)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual
4 - 1 2
Table 4-2: FreeSpeak Basestation 4-Wire Pinout
CONNECTING WITH CLEAR-COM MATRIX PLUS
The connection between a Matrix Plus digital intercom port and a
FreeSpeak 4-wire port is accomplished with a standard 4-pair
straight-through CAT-5 data cable with RJ-45 connectors on both
ends. In the current generation of FreeSpeak, the audio input and
audio output pairs are all that will be used.
In the Matrix Plus PGM-WIN configuration software, set the matrix port
that is connected to the FS-BASE basestation 4-wire port to “4-Wire”. If
the label of this FreeSpeak 4-wire port is to be put onto more than one
intercom panel within the matrix system, and any and all people who
have activated a talk/listen to that port to be able to hear each other, as
well as hearing the person talking to them from the FreeSpeak
wireless beltpack, also check “Party-Line Enable” for that 4-Wire
connection in the configuration software.
Within the FreeSpeak Basestation configuration software, the user can
adjust the input and output level for that port. Alternately, the input and
output levels can be adjusted on the FreeSpeak basestation for the
particular 4-wire port, using the front-panel display. Repeat the
procedure for each FreeSpeak 4-wire port that is connected with the
Matrix Plus system. Note that FreeSpeak does not currently generate
a call signal to the Matrix port.
CONNECTING WITH CLEAR-COM ECLIPSE DIGITAL
MATRIX
The procedure to connect between a FreeSpeak 4-wire port and the
Eclipse digital matrix is similar to that of Matrix Plus 3. An identical
connection is made with 4-pair straight-through CAT-5 cable between
an Eclipse port and the FreeSpeak port.
Within the Eclipse Configuration System software (ECS), set the port
to “Direct.” This will allow intercom stations in the Eclipse system to
converse with the FreeSpeak basestation and beltpacks. Because
Pin Description
1 Not used
2 Not used
3 Audio Output +
4 Audio Input +
5 Audio Input -
6 Audio Output -
7 Not used
8 Not used