Using secure copy, Using secure copy 2 – Brocade BigIron RX Series Configuration Guide User Manual
Page 1080
1002
BigIron RX Series Configuration Guide
53-1002484-04
Using secure copy
31
Syntax: show who [| begin< expression> | exclude< expression> | include< expression>]
To terminate one of the active SSH connections, enter the following command.
BigIron RX# kill ssh 1
Syntax: kill ssh <connection-id>
Using secure copy
Secure Copy (SCP) uses security built into SSH to transfer files between hosts on a network,
providing a more secure file transfer method than Remote Copy (RCP) or FTP. SCP automatically
uses the authentication methods, encryption algorithm, and data compression level configured for
SSH. For example, if password authentication is enabled for SSH, the user is prompted for a user
name and password before SCP allows a file to be transferred. No additional configuration is
required for SCP on top of SSH.
You can use SCP to copy files on the device, including the startup configuration and running
configuration files, to or from an SCP-enabled remote host.
SCP is enabled by default and can be disabled. To disable SCP, enter the following command.
BigIron RX(config)# ip ssh scp disable
Syntax: ip ssh scp disable | enable
NOTE
If you disable SSH, SCP is also disabled.
The following are examples of using SCP to transfer files from and to a device.
BigIron RX#show who
Console connections:
established, monitor enabled, in config mode
2 minutes 17 seconds in idle
Telnet connections (inbound):
1 closed
2 closed
3 closed
4 closed
5 closed
Telnet connection (outbound):
6 closed
SSH connections:
1 established, client ip address 192.168.144.241, user is hanuma
1 minutes 16 seconds in idle
2 established, client ip address 192.168.144.241, user is Mikaila
you are connecting to this session
18 seconds in idle
3 established, client ip address 192.168.144.241, user is Jenny
1 minutes 39 seconds in idle
4 established, client ip address 192.168.144.242, user is Mariah
41 seconds in idle
5 established, client ip address 192.168.144.241, user is Logan
23 seconds in idle