Brocade BigIron RX Series Configuration Guide - Manual (Page 730)

652 BigIron RX Series Configuration Guide
53-1002484-04
Trunk formation
23
Trunk formation
When a trunk is formed, the PBR policy on the primary port applies to all the secondary ports. If a
different PBR policy exists on a secondary port at a time of a trunk formation, that policy is
overridden by the PBR policy on the primary port. If the primary port does not have a PBR policy,
then the secondary ports will not have any PBR policy. When a trunk is removed, reload the device
to restore any PBR policies that were originally configured on the secondary ports.