Brocade BigIron RX Series Configuration Guide - Manual (Page 640)

562 BigIron RX Series Configuration Guide
53-1002484-04
Configuring MCT
20
interface ethernet 1/5
port-name MRP-from-Master
enable
!
interface ve 100
ip address 1.1.1.1/24
!
cluster MRPRing 1
rbridge-id 1
session-vlan 4090
member-vlan 2
icl MRPRing ethernet 1/1
peer 1.1.1.2 rbridge-id 2 icl MRPRing
deploy
client client-1
rbridge-id 100
client-interface ethernet 1/3
deploy
!
end
----------------------------------------
Switch B
lag "1" dynamic id 1
ports ethernet 1/1 to 1/2
primary-port 1/1
deploy
port-name "ICL-to-Switch-1:1/1" ethernet 1/1
port-name "ICL-to-Switch-1:1/2" ethernet 1/2
!
lag "2" dynamic id 2
ports ethernet 1/3 to 1/4
primary-port 1/3
deploy
port-name "lag-client-1:1/3" ethernet 1/3
port-name "lag-client-1:1/4" ethernet 1/4
!
no route-only
!
vlan 1 name DEFAULT-VLAN
no untagged ethe 1/1 to 1/2
!
vlan 2 name client-VLAN
untagged ethe 1/3 to 1/5
tagged ethe 1/1 to 1/2
metro-ring-1
ring-interfaces ethe 1/1 ethe 1/5
enable
!
vlan 4090 name Session-VLAN
tagged ethe 1/1 to 1/2
router-interface ve 100
!
hostname Switch-2
!
interface ethernet 1/5
port-name MRP-to-Master
enable
!