Brocade BigIron RX Series Configuration Guide - Manual (Page 1118)

1040 BigIron RX Series Configuration Guide
53-1002484-04
Displaying MAC Port Security information
33
Displaying the secure MAC addresses list on the device
To list the secure MAC addresses configured on the device, enter the following command.
Syntax: show port security mac
This command displays the following information.
Displaying MAC Port Security statistics
You can display MAC Port Security statistics for an interface or for a module.
For example, to display MAC Port Security statistics for interface 7/11.
Syntax: show port security statistics <portnum>
To display MAC Port Security statistics for a module, enter the following command.
TABLE 165 Output from the show port security mac command
This field... Displays...
Port The slot and port number of the interface.
Count The number of MAC addresses secured on this interface.
Secure-Src-Addr (S) The secure MAC address. (S) means "secure".
VLAN ID of VLAN to which the interface is assigned.
Age-Left The number of minutes the MAC address will remain secure.
TABLE 166 Output from the show port security statistics < portnum > command
This field... Displays...
Port The slot and port number of the interface.
Total-Addrs The total number of secure MAC addresses on the interface.
Maximum-Addrs The maximum number of secure MAC addresses on the interface.
Violation The number of security violations on the interface.
Shutdown/Time-Left Whether the interface has been shut down due to a security violation and the
number of seconds before it is enabled again.
BigIron RX# show port security mac
Port Count Secure-Addr(S) Vlan AgeLeft
----- ----- ------------------ ---- ---------
3/2 1 0003.0000.0001 (S) 1 permanent
3/2 2 0003.0000.0002 (S) 1 permanent
3/2 3 0003.0000.0003 (S) 1 permanent
3/2 4 0003.0000.0004 (S) 1 permanent
BigIron RX# show port security statistics e 7/11
Port Total-Addrs Maximum-Addrs Violation Shutdown/Time-Left
----- ----------- ------------- --------- ------------------
7/11 1 1 0 no