Displaying ipv6 traffic statistics – Brocade BigIron RX Series Configuration Guide User Manual
Page 1281
BigIron RX Series Configuration Guide
1203
53-1002484-04
Displaying global IPv6 information
44
Displaying IPv6 traffic statistics
To display IPv6 traffic statistics, enter the following command at any CLI level.
Send: total unacknowledged sequence number =
<
number>
The total number of unacknowledged sequence
numbers sent by the local router.
Send: total used buffers
<
number>
The total number of buffers used by the local
router in setting up the TCP connection.
Receive: initial incoming sequence number =
<
number>
The initial incoming sequence number received by
the local router.
Receive: expected incoming sequence number =
<
number>
The incoming sequence number expected by the
local router.
Receive: received window =
<
number>
The size of the local router’s receive window.
Receive: bytes in receive queue =
<
number>
The number of bytes in the local router’s receive
queue.
Receive: congestion window =
<
number>
The size of the local router’s receive congestion
window.
TABLE 196
Specific IPv6 TCP connection fields (Continued)
This field...
Displays...