Brocade BigIron RX Series Configuration Guide - Manual (Page 599)

BigIron RX Series Configuration Guide 521
53-1002484-04
Displaying traffic reduction
19
To display rate-limit VLAN groups, enter the following.
Syntax: show rate-limit [counters [interface <slot/port>]] [group [<vlan-number>]] [interface
<slot/port>]
The counters parameter displays bytes forwarded and dropped by the interfaces that have a
rate-limiting policy. <slot/port> specifies a particular interface.
The group <vlan-number> parameter indicates the rate limiting VLAN group for which the
rate-limiting policy is created.
interface <slot/port> displays the rate limiting policy for a particular interface.
BigIron RX(config)# show rate-limit interface 1/3
interface ethernet 1/3
rate-limit input vlan-id 10 499321856 750000000
rate-limit input vlan-id 20 97523712 200000000
BigIron RX(config)# show rate-limit group
rl-vlan-group 10
vlan 3 5 to 7