Multi-chassis trunking – Brocade BigIron RX Series Configuration Guide User Manual

Page 1521

Advertising
background image

BigIron RX Series Configuration Guide

1443

53-1002484-04

Multi-Chassis Trunking

E

Multi-Chassis Trunking

Commands

See ...

lag <name> [static | dynamic] [id <number>]

“Creating and deploying the LAGs”

on page 533

ports ethernet [slot/port] | to | [slot/port]

primary-port

<

slot/port>

deploy [forced | passive]

port-name

<

text> ethernet

<

slot/port> | pos

<

slot/port>

route-only

“Enabling Layer 2 switching”

on page 536

vlan

<

vlan-id>

“Creating VLANs for client traffic”

on page 536

untagged ethernet [slot/port] | to | [slot/port]

tagged ethernet [slot/port] | to | [slot/port]

vlan

<

vlan-id>name

<

vlan-name>

“Creating the session VLAN”

on page 536

hostname

<

string>

“Assigning the host name (optional)”

on page 537

enable

“Enabling the interfaces”

on page 537

port-name

<

text>

“Assigning a port name (optional)”

on page 537

interface [ve

<

ve-id>]

“Adding a VE interface”

on page 538

ip address

<

ip-addr>

<

ip-mask>

cluster

<

cluster-name>

<

cluster-id>

“Configuring the cluster operation mode”

on

page 538

rbridge-id

<

id>

session-vlan

<

vlan-id>

member-vlan

<

x>to

<

y>

icl

<

icl-name> ethernet

<

x/y>

peer

<

peer-ip> rbridge-id

<

peer-rbridge> icl

<

map-icl>

deploy

client

<

client-name>

“Configuring the MCT cluster clients”

on page 539

client-interface

<

interface> interface : ethernet

<

x/y>

peer

<

peer-ip> disable-fast-failover

“Creating and deploying the LAGs”

on page 541

client-isolation loose

“Configuring client isolation mode”

on page 545

client-isolation strict

client-interfaces shutdown

“Shutting down all the client interfaces”

on page 546

keep-alive-vlan

<

vlan-id>

“Configuring a Keepalive VLAN”

on page 546

peer

<

peer-ip> timers keep-alive

<

keep-alive time>

hold-time

<

hold-time>

“Setting the keepalive timers and hold time for the
peers”

on page 547

show cluster [

<

name> |

<

client-id>]

“Displaying detailed cluster information”

on

page 547

show cluster

<

name> client

<

client-rbridge>

“Displaying cluster client reachability information”

on

page 548

Advertising