Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 1097)

1050 Brocade Network Advisor SAN User Manual
53-1002948-01
Accessing Flow Vision from other management application features
30
Port connectivity
Select a port from the Port Connectivity View dialog box and select Add Flow to launch the Add Flow
Definition dialog box. Use this dialog box to define a flow between the source and destination
devices.
Table 99 describes how options are populated on the Add Flow Definition dialog box are populated
according to the row selected on the Reverse Route tab,
For more information on accessing and using the Port Connectivity View dialog box, refer to
“Viewing port connectivity” on page 389.
TABLE 100 Add Flow Definition dialog box options populated per Reverse Route selection
Row Selected Options populated
E_Port Source Device = * if port is on a 16-Gbps switch, otherwise
empty.
Destination Device = * if port is on a 16-Gbps switch, otherwise
empty.
Target Switch = Selected switch.
Direction = Bidirectional
Initiator Source Device = Initiator port ID.
Destination Device = * if port is on a 16-Gbps switch, otherwise
empty.
Ingress Port = Selected port's connected switch port number.
Target Switch = Selected port's connected switch.
Direction = Bidirectional
Target row Source Device = * if port is on a 16-Gbps switch, otherwise
empty.
Destination Device = Target port ID.
Ingress Port = Selected port's connected switch port number.
Target Switch = Selected port's connected switch.
Direction = Bidirectional
If selected row is
neither the first
or last row. Source Device = * if port is on a 16-Gbps switch, otherwise
empty.
Destination Device = * if port is on a 16-Gbps switch, otherwise
empty.
Ingress Port = Selected port number.
Target Switch = Selected switch.
Direction = Bidirectional