Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 191)

Brocade Network Advisor SAN User Manual 141
53-1002948-01
User accounts
6
FIGURE 49 Add User dialog box
3. Enter a unique name to identify the user in the User ID field.
4. Enter a password for the user in the Password and Confirm Password fields.
Passwords displays as dots (.). For password policy details, refer to “Viewing your password
policy” on page 163.
5. Select the Account Status - Enable check box to enable the account of the user.
Account Status is enabled by default.
6. (Optional) Enter the full name of the user in the Full Name field.
7. (Optional) Enter a description for the user in the Description field.
8. (Optional) Enter the phone number of the user in the Phone Number field.
9. Select the E-mail Notification - Enable check box to enable e-mail notification for the user.
E-mail Notification is disabled by default.
10. Click Filter to set up basic event filters for the user.
For step-by-step instructions about setting up basic event filters, refer to “Setting up basic
event filtering” on page 1088.
11. Enter the e-mail address of the user in the E-mail Address field.
Enter more than one e-mail address, separating each with a semi-colon. To send a text
message or page via e-mail, use the following format number@carrier.com, where number is
your phone number and carrier.com is the SMS server. For example, [email protected]
(text message) or [email protected] (page).
NOTE
Check with your carrier for the exact e-mail address.