Top port traffic monitor – Brocade Network Advisor SAN User Manual v12.1.0 User Manual
Page 260
210
Brocade Network Advisor SAN User Manual
53-1002948-01
Performance monitors
7
Top Port Traffic monitor
The Top Port Traffic monitor (
) displays the top ports with receive and transmit traffic in a
table.
FIGURE 74
Top Port Traffic monitor
The Top Port Traffic monitor includes the following data:
•
Severity icon/monitor title — Displays the worst severity of the data shown next to the monitor
title.
•
Port — The port affected by this monitor.
•
Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
-
Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
-
Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
-
Target — The target port on the connected device. Click to launch the device properties
dialog box.
•
RX Traffic (MB/s) — The top receive traffic in megabits per second.
•
TX Traffic (MB/s) — The top transmit traffic in megabits per second.
•
Product — The product affected by this monitor.
•
Type — The type of port (for example, U-Port).
•
Identifier — The port identifier.
•
Port Number — The port number.
•
State — The port state (for example, Enabled).
•
Status — The port status (for example, Up).
•
Refreshed — The time of the last update for the monitor.
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to