Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 1265)

1218 Brocade Network Advisor SAN User Manual
53-1002948-01
Upload failure data capture
35
FIGURE 501 Upload Failure Data Capture dialog box
2. Select a one or more devices on which you want to enable automatic trace dump from the
Available Switches with Upload Failure Data Capture Disabled table.
The Available Switches with Upload Failure Data Capture Disabled table displays the following
information:
• All Levels — All discovered devices and ports as both text and icons.
• Name — The name of the available switch.
• Product Type — The type of product.
• Tag — The tag number of the device.
• Serial # — The serial number of the device.
• WWN — The switch port’s world wide name.
• IP Address — The switch port’s IP address.
• Domain ID — The switch port’s top-level addressing hierarchy of the domain.
• Vendor — The hardware vendor’s name.
• Model — The name and model number of the hardware.
• Port Count — The total number of ports.
• Firmware — The firmware version.
• Location — The customer site location.
• Contact — The primary contact at the customer site.
• Description — A description of the customer site.
• State — The switch state, for example, online or offline.
• Status — The operational status of the switch, for example, unknown or marginal.