Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 833)

Brocade Network Advisor SAN User Manual 785
53-1002948-01
LSAN zones
21
3. Select Import from the Zone DB Operation list.
The Import Zone DB dialog box displays.
4. Browse to the zone database file (.xml format).
5. Click Import Zone DB.
6. Click OK to save your work and close the Zoning dialog box.
Rolling back changes to the offline zone database
Use this procedure to reverse changes made to an offline zone database.
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Select the zone database you want to roll back from the Zone DB list.
You must select an offline zone database that has a value in the Last Saved to Fabric column.
You cannot roll back changes for zone databases that were never saved to the fabric.
3. Select Roll Back from the Zone DB Operation list.
The selected zone database reverts back to what it was before the changes were applied.
4. Click OK to save your work and close the Zoning dialog box.
LSAN zones
Connecting to another network through a Fibre Channel (FC) router, you can create an LSAN zone to
include zone objects on other fabrics. No merging takes place across the FC router when you create
an LSAN zone.
Supported configurations for LSAN zoning
LSAN zoning is available only for backbone fabrics and any directly connected edge fabrics. A
backbone fabric is a fabric that contains an FC router. All discovered backbone fabrics have the
prefix LSAN_ in their fabric name, which is listed in the Zoning Scope list.
LSAN zones are supported between the following types of fabrics:
• Fabric OS and Fabric OS
NOTE
LSAN zoning is supported only in Enterprise and Professional Plus editions.