Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 1495)

1448 Brocade Network Advisor SAN User Manual
53-1002948-01
Database tables and fields
H
COS2_RX RX setting for this cos field 0: NO 1: YES smallint
COS6_TX TX setting for this cos field 0: NO 1: YES smallint
COS6_RX RX setting for this cos field 0: NO 1: YES smallint
COS7_TX TX setting for this cos field 0: NO 1: YES smallint
COS7_RX RX setting for this cos field 0: NO 1: YES smallint
TABLE 262 PORT_PROFILE_VLAN_MAP
Field Definition Format Size
ID Unique generated database identifier. int
PROFILE_ID DB id of the port profile. int
VLANID Configured vlan id on the switch. int
VLAN_TYPE Type of this vlan, 0 : access 1: trunk. int
TABLE 263 PORT_VLAN
Field Definition Format Size
VLAN_DB_ID Database ID of the VLAN instance which is
associated with the port. int
STP STP value for VLAN. Possible values are 0-Disabled,
1-STP, 2-RSTP, 3-MSTP, 4-PVST and 5-RPVST. num (1,0)
TVF 0 means Disabled, 1 means Enabled. When TVF is
enabled, packets are allowed to be forwarded
without any form of CPU intervention including MAC
learning and MAC destination lookups. When it is
disabled (VLAN CPU Protection), it allows traffic
intended for pure Layer2. smallint
VLAN_ID ID for VLAN. VLAN IDs are from 1 - 4090. smallint
QOS Quality of service for port VLAN. smallint
GLOBAL_VLAN_DB_ID Database ID of the GLOBAL_VLAN instance which is
associated with the port. int
STP_INSTANCE_ID Database ID of the STP_INSTANCE instance which is
associated with the port. int
ADMIN_STATUS
•
0 = Disabled
•
1 = Enabled
smallint
FCOE_ENABLED Signifies whether this VLAN is the default FCoE VLAN
on the DCB switch. smallint
TABLE 261 PORT_PROFILE_QOS_PFC_MAP
Field Definition Format Size