Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 252)

202 Brocade Network Advisor SAN User Manual
53-1002948-01
Performance monitors
7
• Encode Error Out/sec — The number (error rate) of encoding errors outside of frames per
second for the duration specified in the monitor.
• Encode Error Out — The number (error count) of encoding errors outside of frames for the
duration specified in the monitor.
• Product — The product affected by this monitor.
• Type — The type of port (for example, U-Port).
• Identifier — The port identifier.
• Port Number — The port number.
• State — The port state (for example, Enabled).
• Status — The port status (for example, Up).
• Refreshed — The time of the last update for the monitor.
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to
“Editing a preconfigured performance monitor” on page 220.
Accessing additional data from the Top Port Encode Out Errors monitor
• Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to
“Application menus” on
page 1229.
• Double-click a row to navigate to the Historical Graphs/Tables dialog box. For more
information, refer to
“Performance Data” on page 963.
Top Port Link Failures monitor
The Top Port Link Failures monitor ( Figure 70 ) displays the top ports with link failures in a table.
FIGURE 70 Top Port Link Failures monitor
The Top Port Link Failures monitor includes the following data:
• Severity icon/monitor title — The worst severity of the data based on the error count shown
next to the monitor title.
• Port — The port affected by this monitor.