Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 1349)

1302 Brocade Network Advisor SAN User Manual
53-1002948-01
Properties customization
E
3. Click OK to close.
Properties customization
NOTE
Properties customization requires read and write permissions to the Properties - Add / Delete
Columns privilege.
You can customize the product and fabric Properties dialog boxes by creating user-defined fabric,
product, and port properties. You can also edit or delete user-defined properties, as needed.
You can create up to three user-defined property labels from the Properties dialog box for each of
the following object types: fabric, product, and port properties. Product and fabric property labels
created from the Properties dialog box display in the Product List and the Properties dialog box.
Port property labels created from the Properties dialog box display in the Product List and the
Properties dialog box. User-defined properties must be unique across all Properties dialog boxes
and the Product List.
Property fields containing a green triangle ( ) in the lower right corner are editable. To edit a field
with a green triangle ( ), click in the field and make your changes.
FCSP Status Whether FC-SP authentication is being used.
Algorithm The configured authentication algorithm.
Group The DH group, which is DH-null (group 0), which is the only option.
Error Status The health status of the Fibre Channel Security Protocol parameters.
QoS
Configured QoS State Indicates whether QoS is enabled or disabled.
Operating QoS State Indicates whether QoS is on or off.
Total BB Credit The total number of buffer credits.
Priority Levels Lists the available priorities (High, Medium, Low).
Add button Click to add a user-defined property. For more information, refer to
“Adding a property field” on page 1303.
Edit button Click to edit a user-defined property. For more information, refer to
“Editing a property field” on page 1303.
Delete button Click to delete a user-defined property. For more information, refer to
“Deleting a property field” on page 1304.
TABLE 31 Adapter port properties (Continued)
Field Description