Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 153)

Brocade Network Advisor SAN User Manual 103
53-1002948-01
Syslog Registration settings
5
Syslog Registration settings
You can automatically register the server as the syslog recipient on products.
Registering a server as a Syslog recipient automatically
1. Select Server > Options.
The Options dialog box displays.
2. Select Syslog Registration in the Category pane.
The Syslog Registration pane displays ( Figure 32 ).
FIGURE 32 Options dialog box (Syslog Registration pane)
3. Select the Auto register server as Syslog recipient check box, if necessary.
This check box is selected by default.
4. Click Apply or OK to save your work.
Configuring the Syslog listing port number
1. Select Server > Options.
The Options dialog box displays.
2. Select Syslog Registration in the Category pane.
The Syslog Registration pane displays ( Figure 32 ).
3. Enter the Syslog listening port number of the Server in the Syslog Listening Port (Server) field,
if necessary.
The default Syslog listening port number is 514 and is automatically populated.
For Fabric OS and devices, only the default port (514) can be registered as the Syslog Listening
Port.
4. Click Apply or OK to save your work.