Brocade Network Advisor SAN User Manual v12.1.0 User Manual

Page 1335

Advertising
background image

1288

Brocade Network Advisor SAN User Manual

53-1002948-01

SAN device properties

E

Physical/Logical

Whether the device is a physical device or a logical device.

Port Count

The number of ports.

Port Type

The port type.

Preshared key configured

Whether the preshared key is configured for the FCIP tunnel.

Reason

The device status.

Remote Switch Name

The remote switch name of the trunk.

Remote Switch IP

The remote switch IP address of the trunk.

Remote Switch WWN

The remote switch world wide name of the trunk.

Remote Slot #

The remote slot number of the trunk.

Remote Master Port

The remote master port of the trunk.

Remote Member Ports

The remote member port of the trunk.

Sequence number

The sequence number of the switch.

Serial #

The hardware serial number.

Slot #

The slot number of the trunk.

Source IP Address

The IP address of the of the FCIP tunnel source device.

Speed (Gb/s)

The speed of the port in gigabytes per second.

State

The device’s state, for example, online or offline.

Status

The operational status.

Switch Name

The switch name.

Switch IP

The switch IP address.

Switch WWN

The switch world wide name.

Tape Pipelining

Whether tape pipelining is On or Off for the FCIP tunnel.

Tunnel ID

The tunnel identifier.

Type

The device type.

Unit Type

The unit type of the node.

Vendor

The product vendor.

# Virtual FCoE port count

The number of virtual FCoE ports on the device. There is a one-to-one
mapping of TE ports to virtual FCoE ports. Therefore, the number of
virtual session ports is one for directly connected devices.

VLAN #

The VLAN number of the FCIP tunnel.

VLAN Class of Service for Control
Connection

The VLAN class of service for the control connection of the FCIP tunnel.

VLAN Class of Service for Data
Connection

The VLAN class of service for the data connection of the FCIP tunnel.

VLAN ID

The VLAN identification number.

WWN

The world wide name of the device.

Add button

Click to add a user-defined property. For more information, refer to

“Adding a property field”

on page 1303.

TABLE 128

Device properties (Continued)

Field/Component

Description

Advertising