Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 210)

160 Brocade Network Advisor SAN User Manual
53-1002948-01
Authentication Server Groups authorization on the Management server
6
d. Enter a description of the attribute in the Description field.
e. Select Case Insensitive String in the Syntax list.
f. Click OK.
9. Right-click the Attributes folder (Console Root/Active Directory Schema/ Attributes) and select
New > Attribute.
10. Create the NmRoles attribute by completing the following steps.
a. Enter NmRoles in the Common Name field.
b. Enter NmRoles in the LDAP Display Name field.
c. Enter a unique object identifier in the Unique x500 Object ID field.
d. Enter a description of the attribute in the Description field.
e. Select Case Insensitive String in the Syntax list.
f. Click OK.
11. Close the Management console.
Configuring authorization details on the external LDAP server
Open the ADSI Edit dialog box on the Active Directory installed server.
1. Select Start > Run.
2. Type adsiedit.msc and press Enter.
3. Right-click CN=User_Name in the CN=Users directory and select Properties.
Where User_Name is the name of the user you created in “Creating an AD user account” on
page 158.
4. Select NmAors in the Attributes list and click Edit.
5. Enter the areas of responsibility (such as, All Fabrics, All IP Products) in the Value field and click
OK.
6. Select NmRoles in the Attributes list and click Edit.
7. Enter the Management application user roles (such as Host Administrator, IP System
Administrator, Network Administrator, Operator, Report User Group, SAN System Administrator,
Security Administrator, Security Officer, and Zone Administrator) in the Value field and click OK.
8. Close the ADSI Edit dialog box.