Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 97)

Brocade Network Advisor SAN User Manual 47
53-1002948-01
SAN discovery overview
4
FIGURE 11 Add Fabric Discovery dialog box (SNMP tab)
7. Select the SNMP version from the SNMP Version list.
• If you selected v1, continue with step 8.
• If you select v3, the SNMP tab displays the v3 required parameters. Go to step 12.
To discover a Virtual Fabric device, you must configure SNMPv3 and your SNMP v3 user
account must be defined as a Fabric OS switch user.
8. Specify the Read option by selecting Default ‘public’ or Custom.
9. If you selected Custom, enter the community string in the Custom and Confirm Custom fields.
10. Specify the Write option by selecting Default ‘private’ or Custom.
11. If you selected Custom, enter the community string in the Custom and Confirm Custom fields.
Go to step 7.
12. If you are configuring a 256-Port director, select the Configure for 256-Port_Director_Name
check box.
• If you selected Configure for 256-Port_Director_Name, go to step 16.
• If you did not select Configure for 256-Port_Director_Name, continue with step 13.
13. Enter a user name in the User Name field.
14. Enter a context name In the Context Name field.
15. Select the authorization protocol in the Auth Protocol field.
16. Enter the authorization password in the Auth Password field.
• If you selected Configure for 256-Port_Director_Name, go to step 19.
• If you did not select Configure for 256-Port_Director_Name, continue with step 17.
17. Select the privacy protocol in the Priv Protocol field.
18. Enter the privacy password in the Priv Password field.
19. Click OK on the Add Fabric Discovery dialog box.
If the seed switch is not partitioned, continue with step 20 .
If the seed switch is partitioned, the Undiscovered Seed Switches dialog box displays.