Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 151)

Brocade Network Advisor SAN User Manual 101
53-1002948-01
Miscellaneous security settings
5
FIGURE 31 Options dialog box (Security Misc pane)
3. Enter the server name in the Server Name field.
The Server Name field cannot be empty.
4. Click OK on the confirmation message.
5. Click Apply or OK to save your work.
Enforcing MD5 file during import
NOTE
The MD5 checksum file is required when you load Fabric OS firmware into the Management
application version 12.0 or later.
You can configure the Management application to enforce the MD5 checksum file import during
the import of the Fabric OS image into the firmware repository.
The MD5 checksum file can be obtained from the Fabric OS product download site in the same
location as the firmware file. The MD5 checksum file cannot be downloaded directly from the site;
however, you can open the file, copy and paste the contents into a new file, and save the file with
the .md5 extension in the same directory as the firmware file.
1. Select Server > Options.
The Options dialog box displays.
2. Select Security Misc in the Category list.
3. Select the Enforce Fabric OS MD5 Checksum File Import check box.
4. Click Apply or OK to save your work.