Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 694)

646 Brocade Network Advisor SAN User Manual
53-1002948-01
Creating a new encryption group
20
FIGURE 254 Next Steps dialog box
13. Review the post-configuration instructions, which you can copy to a clipboard or print for later,
then click Finish to exit the wizard.
Configuring key vault settings for NetApp Link Key Manager
(LKM/SSKM)
The following procedure assumes you have already configured the initial steps in the Configure
Switch Encryption wizard. If you have not already done so, go to
“Creating a new encryption group”
on page 636.
Figure 255 shows the key vault selection dialog box for LKM/SSKM.