Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 467)

Brocade Network Advisor SAN User Manual 417
53-1002948-01
Port Auto Disable
12
FIGURE 147 Port Auto Disable dialog box
2. Select a fabric from the Fabric list.
An information message displays the number of block ports for the fabric, if any.
3. Select one of the following from the Show list to determine what ports to display:
• All Ports (default)
• Disabled PAD Ports
• Enabled PAD Ports
• Blocked Ports
4. Review the port information:
• Products/Ports tree — Displays devices and associated ports. Also, displays a Warning icon
for blocked FC ports (displayed with the port icon). Click the plus sign (+) symbol to expand
the view to display the ports.
• Port Auto Disable — Displays whether Port Auto Disable is currently enabled or disabled on
the device or port.
• Port Block Status — Displays whether the port is currently blocked.
• Loss of Sync — Whether the Loss of Sync event is enabled or disabled.
• Loss of Signal — Whether the Loss of Signal event is enabled or disabled.
• OLS — Whether the Offline Primitive Sequence event is enabled or disabled.
• NOS — Whether the Not Operational Primitive Sequence event is enabled or disabled.
• LIP — Whether the Loop Initialization Primitive Sequence event is enabled or disabled.
• Port Type — Displays the port type.