Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 302)

252 Brocade Network Advisor SAN User Manual
53-1002948-01
SAN tab overview
8
View All list
The View All list is located at the top left side of the window and enables you to create, copy, or edit
a view, select to how to view the Product list (All Levels, Products and Ports, Products Only, or Ports
Only) and to select which view you want to display in the main window. Does not display until you
discover a fabric. To discover a fabric, refer to
“Discovering fabrics” on page 41.
1. Create View — Select to create a new view.
2. Copy View — Select to copy an existing view.
3. Edit View — Select to edit an existing view.
4. Levels — Select the level at which you want to view the Product list, Options include: All Levels,
Products and Ports, Products Only, or Ports Only.
5. View_Name — Any additional views that you create. Select which view you want to display in the
main window.
6. View All — Select to display the default view of the main window.
Port Display buttons
The Port Display buttons are located at the top right of the Product List and enable you to configure
how ports display. You have the option of viewing connected (or occupied) product ports,
unoccupied product ports, or attached ports. Not enabled until you discover a fabric or host.
NOTE
Occupied/connected ports are those that originate from a device, such as a switch. Attached ports
are ports of the target devices that are connected to the originating device.
FIGURE 91 Port Display buttons
1. Show/Hide Occupied Port — Displays or hides the ports of the devices in the fabrics (present in
the connectivity map) that are connected to other devices.
2. Show/Hide Attached Port — Displays or hides the attached ports of the target devices.
1
2
3
4
5
6
1 2 3