Viewing port properties – Brocade Network Advisor SAN User Manual v12.1.0 User Manual
Page 1340
Brocade Network Advisor SAN User Manual
1293
53-1002948-01
SAN device properties
E
3. Click OK on the Properties dialog box to close.
Viewing port properties
The following port types are available depending on the device:
•
FC Ports
•
GigE Ports
•
IP Ports
•
iSCSI Ports
NOTE
iSCSI ports that have an FC Address of all zeros are inactive. All others are active.
•
Virtual Sessions Ports
•
Virtual FCoE Ports
To view a port’s properties, right-click on a port and select Properties, or double-click the port.
The port Properties dialog box displays (
).
To add user-defined property labels, refer to
Fields containing a green triangle ( ) in the lower right corner are editable.
Name (Product)
The name of the product.
OS
The name of the operating system running on the product.
OS Build
The operating system build running on the product.
OS Release
The operating system release running on the product.
Portal Addresses
The list of IP addresses.
Port
The port number.
Protocol Error Count
The number of protocol errors.
Tag
The group tag ID of the portal.
Sessions button
Select to display the Filer Sessions dialog box for the product.
Statistics button
Select to display the Filer iSCSI Statistics dialog box for the product.
Storage Arrays
The number of arrays containing LUNs masked to the server.
Storage Logins
The number of unique filers to which hosts on this server are logged in.
Target Portals table
Target portals of the product.
Total LUN Size (GB)
The size in gigabytes (GB) of all unique LUNs (not LUN paths) masked to
the product.
Vendor
The vendor of the product.
Field
Description