Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 115)

Brocade Network Advisor SAN User Manual 65
53-1002948-01
Host discovery
4
FIGURE 16 Add Host Adapters dialog box
3. Enter a discovery request name (such as, MyVMManager) in the Discovery Request Name
field.
4. Select Hosts from VM Manager from the import by list.
5. Select All VM or an individual VM from the list.
6. Click Add.
All hosts which are part of a discovered VM manager and have a registered host name display
in the list. If no host with a registered host name exists, an error message displays. Click OK to
close the error message.
7. Configure Host credentials by choosing one of the following options:
• To configure HCM agent credentials, select the HCM agent option. Go to step 9 .
• To configure CIM server credentials, select the CIM server (ESXi only) option. Continue with
step 8 .
If you do not need to configure Host credentials, skip to step 12 .
8. Configure discovery authentication by choosing one of the following options:
• To configure discovery with authentication, select the HTTPS from the Protocol list.
• To configure discovery without authentication, select the HTTP from the Protocol list.
9. Enter the port number in the Port field.
HCM agent default is 34568. CIM server HTTPS default is 5989. CIM server HTTP default is
5988.
10. Enter your username in the User ID field.
HCM agent default is admin. Leave this field blank for the CIM server.
11. Enter your password Password field.
HCM agent default is password. Leave this field blank for the CIM server.