Snmp trap forwarding credential settings, Configuring snmp v1 and v2c credentials, Configuring snmp v3 credentials – Brocade Network Advisor SAN User Manual v12.1.0 User Manual
Page 155
Brocade Network Advisor SAN User Manual
105
53-1002948-01
SNMP Trap forwarding credential settings
5
SNMP Trap forwarding credential settings
You can configure SNMP credentials for the traps forwarded by the server.
Configuring SNMP v1 and v2c credentials
To configure a SNMP v1 or v2c credentials, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select Trap Forwarding Credentials in the Category pane.
The Trap Forwarding Credentials pane displays (
).
FIGURE 34
Options dialog box (Trap Forwarding Credentials pane)
3. Enter the unique community string (case sensitive, 1 to 16 characters). in the Community and
Confirm Community fields.
Displays as asterisks. Allows all printable ASCII characters.
4. Click Apply or OK to save your work.
Configuring SNMP v3 credentials
To configure a SNMP v1 or v2c credentials, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select Trap Forwarding Credentials in the Category pane.
The Trap Forwarding Credentials pane displays (
).