Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 99)

Brocade Network Advisor SAN User Manual 49
53-1002948-01
Viewing the fabric discovery state
4
4. Click OK on the confirmation message.
The deleted fabric displays in the Previously Discovered Addresses table.
5. Click Close on the Discover Fabrics dialog box.
Rediscovering a previously discovered fabric
To return a fabric to active discovery, complete the following steps.
1. Select Discover > Fabrics.
The Discover Fabrics dialog box displays.
2. Select the fabric you want to return to active discovery in the Previously Discovered Addresses
table.
3. Click Discover.
4. Click OK on the confirmation message.
The rediscovered fabric displays in the Discovered Fabrics table.
5. Click Close on the Discover Fabrics dialog box.
Deleting a fabric
To delete a fabric permanently from discovery, complete the following steps.
1. Select Discover > Fabrics.
The Discover Fabrics dialog box displays.
2. Select one or more switches that you want to delete permanently from discovery in the
Previously Discovered Addresses table.
3. Click Delete.
4. Click OK on the confirmation message.
5. Click Close on the Discover Fabrics dialog box.
Viewing the fabric discovery state
The Management application enables you to view device status through the Discover Setup dialog
box.
To view the discovery status of a device, complete the following steps.
1. Select Discover > Fabrics.
The Discover Fabrics dialog box displays.
2. Right-click a fabric and select Expand All to show all devices in the fabric.
The Name field displays the discovery status icons in front of the device name. The following
table illustrates and describes the icons that indicate the current status of the discovered
devices.