HT instruments SOLAR300N - Manual (Page 113)

SOLAR300 - SOLAR300N
EN - 111
5.7.2.4. Recording graph
By selecting the recording graph option, the following page is accessed, which enables the
user to display the recording trend (ONLY ONE parameter at a time).
Fig. 177: Selecting a parameter
1. Press the F1 key (or the PARAM item on the display) to access the page of selectable
parameters (Fig. 178).
Fig. 178: Parameter selection
The following keys are active on this page:
 The up and down arrow keys move the cursor along the quantity tree
 The
F1 key (or the CMP/EXP item on the display) compresses and expands the tree of
the quantity highlighted by the cursor
 The F2 key (or the SEL item on the display) selects or deselects the parameter
highlighted by the cursor
 The
ENTER key (or the smart icon on the display) confirms the selection previously
performed and display the graph of the selected parameter (Fig. 179)
 The CANC key deselects the parameter previously selected, independently from the
position of the cursor
 Press
the ESC key (or the smart icon on the display) to exit the function and go back
to the “Selecting a parameter” page (Fig. 177)
This page shows graph, maximum RMS value, average RMS value and minimum RMS
value of the selected parameter and the position of the cursor.