Auerswald 2500 - Manual (Page 101)

Use of the Telephone and PBX System
Ringer Signal
101
Assign Key:
Use Function via Key:
By pressing the key, the flashing display backlight is switched on, off or over.
LED Signalling next to the Key:
Some people are susceptible to epileptic seizures or loss of consciousness when exposed to
certain flashing lights or light patterns. If you had symptoms related to epilepsy when
exposed to flashing lights, do not activate this function.
By switching the function “ringer signal/light” on and off, the function “ringer signal” is also
switched on/off (see previous chapter).
Open the key programming menu for the func-
tion “ringer backlight” (You will find help on
page 33 and the following).
define keys
function key ...
... level
ringer backlight
The current settings for the key
assignment is shown on the
display.
If you like to change the current settings, press
the softkey in front of the corresponding
selection once or several times (You will find
help on
page 155 and the following):
ț [switching type]: Enables the assignment
with switch on, off or over.
Press the softkey to complete the settings.
off The flashing display light is switched off and the acoustical ringer signal is
switched on.
red The flashing display light is switched on and the acoustical ringer signal is
switched off.
Warning
☞
Advice