Auerswald 2500 - Manual (Page 146)

Use of the Telephone and PBX System
Waiting Field
146
pressing the exit key. The LED glows red now and the display is in the idle state. Now you
can start a call as usual (e.g. select a telephone number from the telephone book.
In case of ongoing conversations inbound public exchange line calls will be signalled with
flashing LEDs and additionally with an advice tone - if activated (see
page 168 ). In case of
several active Waiting Field receptions a caller put into the Waiting Field is also signalled via
a signal tone to the other Waiting Field receptions.
Accept internal Calls in the Waiting Field 35
An internal Waiting Field key can be defined to put a single internal call (also emergency calls
and door calls) on hold.
Assign a Key on the Waiting Field Reception:
Use the Function “waiting field internal” via Key:
By pressing the key the internal caller can be put into the Waiting field or a connection can
be established with the caller in the Waiting Field. The function of the key depends on the
current status - displayed by the LED next to the key. Consult the description of the LED sig-
nalling in the following.
LED Signalling next to the Key “waiting field internal”:
35 An internal waiting Field key is only available when operated on the PBX systems COMpact 5020
VoIP, COMmander Basic.2 and COMmander Business. When operated on the PBX systems COM-
mander Basic, COMpact 4410 USB and COMpact 4406 DSL internal calls, emergency calls and door
terminal calls to the Waiting Field reception are only possible if there is no external caller in the Waiting
Field.
Open the key programming menu for the func-
tion “waiting field internal” (You will find help
on
page 33 and the following).
define keys
function key ...
first level
waiting field
internal
Press the softkey to complete the settings.
green There is a connection with an internal subscriber. Information on the call partner
are shown on the display.
(If additional Waiting Field Receptions are activated, the call partner is not sig-
nalled to these)
By pressing the key once, the call partner can be put into the Waiting Field.