Auerswald 2500 - Manual (Page 119)

Use of the Telephone and PBX System
Number Memory and Busy Status Overview
119
Key for Presentation of a MSN 18
With a correspondingly configured key you can select which MSN (own external telephone
number) should be presented for an exchange line call. The selected MSN is used for the call
started after the key is pressed.
Assign Key:
Use Function via Key (only in the idle State of the Telephone):
By pressing the key is selected which MSN should be presented for the following external
call. Now the call can be started by dialling an external telephone number (with exchange line
access number).
LED Signalling next to the Key:
18 Only when operated on the PBX systems COMpact 2204 USB, COMpact 2206 USB, COMpact 4406
DSL, COMpact 4410 USB and COMmander Basic.
When operated on the PBX systems COMpact 5010 VoIP, COMpact 5020 VoIP, COMmander Basic.2
and COMmander Business see
page 120 .
Open the key programming menu for the func-
tion “external MSN” (You will find help on
page 33 and the following).
define keys
function key ...
... level
external MSN
The current settings for the key
assignment is shown on the
display.
If you like to change the current settings, press
the softkey in front of the corresponding
selection once or several times (You will find
help on
page 155 and the following):
ț [telephone number]: Allows to enter an
external telephone number of the PBX (with-
out exchange line access number).
ț [name]: Allows to enter a name for this tele-
phone number.
Press the softkey to complete the settings.
green The MSN assigned to the key is presented for the next outbound external
call.
off The standard telephone number is presented for the next outbound call.