Auerswald 2500 - Manual (Page 184)

Service Functions
Select PBX
184
Select PBX
The configuration of the telephone depends on the connected PBX. If the setting is changed
here (instead of COMpact 5010 VoIP, COMpact 5020 VoIP, COMmander Basic.2 or COM-
mander Business another PBX is selected or vice versa) – after confirmation of the new PBX
on the display – the existing configuration is completely and irrevocably deleted.
To prepare the telephone for the operation on another PBX (service case), select the PBX
used later. Ignore the error message and make the requested settings with COMfortel Set.
If the wrong PBX has been selected, this is detected and an error message is sent (display
message as well as a repeated acoustic tone). If the selection of the wrong PBX is wanted
for service reasons, the error message has to be ignored: Do not confirm the question “select
PBX ... execute?” but press only the
n softkey.
Open the settings menu for “select PBX” (you
find help on
page 33 and the following).
settings
synchronization
select PBX
Use the and softkeys to browse to the
option you require and press the softkey to
the left of the option:
ț [PBX]: Selects one of the offered PBX.
...
☞
Advice