Another internal telephone rings - pickup the call, Another internal telephone rings – pickup the call – Auerswald 2500 User Manual
Page 66
Make a Call
In the Call
66
If you take a waiting call and are in a query now, you will be able to put this call into the Wait-
ing Loop the same way. The call partner to be transferred has to be the active call partner
(marked by ).
If the internal subscriber does not pick up within 60 seconds or if he is still busy after 3 min-
utes of waiting, the transferring party will be called again.
If you pick up the receiver, you will be connected to the external call partner again and will be
able to put him on hold again. If you do not take the call within 60 seconds, the exchange line
connection will completely be disconnected. (If you are busy in the meantime, the period will
be shorter.)
Another internal Telephone rings – Pickup the Call
You will be able to programme an internal subscriber/group telephone number on a freely
programmable function key (speed dialling key; see
). Then you can see with help
of the red flashing LED that this number is called. Now you can take over the call to your tel-
ephone by simply pressing this destination speed dialling key and confirming the pickup.
B
Replace the receiver.
The external call partner con-
tinues to hear the Music on
Hold. As soon as the internal
subscriber finished the previ-
ous call, he is called again. If
he accepts the call, he will be
connected to the waiting caller.
☞
Advice
You are in a call. During this
time a telephone next to you
rings.
Use the and softkeys to browse to option
pickup.
pickup
Press the
softkey to start “pickup”.
Your are hearing the internal
dial tone. Your previous call
partner is hearing the Music on
Hold.
N
internal number
Enter the telephone number of the ringing
telephone.
When you have finished to dial
the telephone number, you are
connected to the caller.
[
]
☞
Advice