Remote programming – Auerswald 2500 User Manual

Page 186

Advertising

Service Functions

Remote Programming

186

Remote Programming

If you like to have the settings of the system telephone changed by your authorized dealer at
a later time, it will not be necessary for a service technician to come to your house. The func-
tion remote programming enables the service technician with the corresponding devices dur-
ing an external telephone connection to read or programme the data of the PBX or the tele-
phone. He needs your authorization of course. That means only if you have released it by
dialling certain digits (release of the PBX), the service technician can make the remote pro-
gramming once.

Sequence of the Remote Programming for the Service Technician

The necessary hardware is a PC connected with a COMfortel 2500 on an internal S

port of

your PBX or alternatively an ISDN PC-controller operated on an internal S

port or on the

public telephone network. The necessary software consists of the configuration software
COMfortel Set and the CAPI 2.0 driver for the system telephone or ISDN PC-controller.

After the release of the customer’s PBX you can read out the configuration with the configu-
ration programme COMfortel Set or reprogram it. Select the “Interface” “ISDN PC-controller
(CAPI 2.0)” in the menu under “Options”. Start with pressing the button “open” or “save”,
then press the key “Telephone”, enter the external telephone number of the customer’s PBX